Removing the Unit s Removing the hard rubber frame
Insert the removal tool into the indentations in the hard rubber frame, and pull it gently until the lock is released.
s Removing the Unit 1 Make the faceplate control panel appear.
NOTE
When the control panel of the faceplate is hidden, the unit will be locked by the sleeve, making it more difficult to remove the unit. 2 Refer to the section �Removing the hard rubber frame� and then remove the hard rubber frame.
3 Remove the screw (M4�8) on the back panel. 4 Insert the removal tool deeply, as illustrated, with the L on the
left and the R on the right.
Accessory4 Removal tool Screw (M4X8) (commercially available)
L
Accessory2 Removal tool
5 Push upward the both
tools, as shown, and pull the unit toward you until it is halfway out. The unit may drop if you pull it out completely.
L
6 Pull the unit all the way out
with your hands, being careful not to drop it.
L
